You don't
To remove the stock radio from a 1994 Hyundai Excel, first, disconnect the negative battery terminal to ensure safety. Then, use a flathead screwdriver to gently pry off the trim panel surrounding the radio. Once the trim is removed, unscrew the mounting screws securing the radio in place, and carefully slide the radio out of the dashboard. Finally, disconnect the wiring harness and antenna cable from the back of the radio.
A fuse box diagram for a 1994 Hyundai Excel is found on the fuse box itself. Underneath the cover of the fuse box will be a sticker labeling all the fuses.
i have a 1994 excel and i use 4 quarters of synthetic oil
it is 1 3 4 2
i have an excel 1994 and originally it was automatic, but it has a Mitsubishi mirage transmission.
Gently pry up on the speaker cover with a small screwdriver or knife. There are screws under the cover to remove the speaker, unplug harness and its free.
underneath the engine to the right when looking at it with fan belt facing you.
Honestly? At the junkyard, or on eBay.
change the valve stem seals
Remove the retaining cover from your 1994 Chevy S 10 pickup truck radio. Remove the radio retaining bolts. Slide the radio out. Remove the wiring harness and the antenna cable from the back of the radio.
The timing ignition terminal on a 1994 Hyundai Excel GL is typically located in the engine compartment, near the driver's side of the vehicle. It is often found near the ignition coil or on the firewall, and may be covered by a protective cap. To access it, you may need to remove any obstructions or covers. Always refer to the vehicle's service manual for precise guidance.
Remove the 1994 be a week Century radio decorative cover. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.