To change the dash light in a 1969 Cutlass, first disconnect the car battery to ensure safety. Remove the dashboard trim and screws holding the instrument cluster in place, then carefully pull the cluster out. Locate the burnt-out bulb sockets, twist them counterclockwise to remove, and replace the old bulbs with new ones. Reassemble the dashboard by reversing the disassembly steps and reconnect the battery.
The check engine light on a 94 Buick Olds Cutlass is read using an OBDII code reader. It is connected to the port under the dash which interfaced directly with the reader.
It's on top of the brake pedal under the dash.
take out light bulb in a dash
the dome light fuse is located on the driveside under the dash it should say dome
my 97 grand am se dash light want come on i change all of the fuse
The color of the wire going to the fuel tank sending unit from the tank level instrument on the dash is taupe (or light tan). 1970 Olds Cutlass SX
It's on top of the brake pedal under the dash.
It's in the fusebox.
you need to reset the reminder light...check online or manual for instructions
is it a warning light or the dash backlight you want to change ????
in the dash panel
NO they are not the same.