To change the ignition switch on a 2002 Dodge Ram 1500, first disconnect the negative battery terminal to prevent any electrical shorts. Remove the steering column covers by unscrewing the screws, then disconnect the wiring harness from the old ignition switch. Unscrew the ignition switch from its mounting and install the new switch, ensuring it's properly aligned. Reassemble the steering column, reconnect the battery, and test the new switch for proper operation.
where is the ignition module located in my 2000 dodge 1500 ram van
how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500
how to remove cover to replace ignition lock cylinder and what type of tools do i need
The ignition key should turn the disable switch.
No safety/inertia/reset switch on a Dodge.
No reset switch on a Dodge Ram.
The "halo" is the lighted ring around where the ignition key goes into the key cylinder for the ignition switch.The "halo" is the lighted ring around where the ignition key goes into the key cylinder for the ignition switch.
To change the ignition switch on a 1983 GMC Sierra 1500, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws, then locate the ignition switch mounted on the steering column. Disconnect the wiring harness from the old switch, unscrew it, and replace it with the new switch, securing it in place. Reconnect the wiring, reassemble the steering column cover, and reconnect the battery to complete the installation.
No.
No such part on a Ram 1500.
Under the distributer
in the computer