0
The only thing more frustrating than changing those two bulbs on my 2001 Tracker is signing into the page. You DO NOT need to remove the license plate - although it will give you about an eighth of an inch more wiggle room. I am a 50 year old woman and managed to do this on my own but it took an hour, a lot of sweat (I'm in FL) , three beers and a lot of cursing.
The plastic lens covers screw off - you have to rotate them about one sixth of a turn and they will pop out. The bulbs themselves do not screw in (this is indicative also by the package of new bulbs that they just pop in) but they have to be in a vertical position to do so. Managing to get your fingers and thumbs up into this limited space is extremely challenging and I broke two nails. To get the bulbs out I finally resorting to using a small piece of rubber inner-tube as a grip and pliers. Getting the bulbs in and replacing the plastic lens covers proved even more challenging, but it is basically a reverse of the process above. Not rocket science but extremely frustrating. Who designs this stuff anyway?
What else can I help you with?
How do I change the license plate light in a 2002 Geo Tracker?
To change the license plate light on a 2002 Geo Tracker, remove the light lens with a small screwdriver. Take out the old bulb and replace with a new one. Tighten the screws on the light lens.
How do you change a license plate lamp in a 2006 Chevy Equinox?
how to change 2005 equinox license plate light i removed the screws but it didn't release
Chevy Tahoe's license plate bulb?
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
How do you change out the license plate light on a 98 Chevy Cavalier?
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
How do you replace license plate bulb on 2003 Chevy Tracker?
To replace the license plate bulb on a 2003 Chevy Tracker, first, locate the license plate light assembly at the rear of the vehicle. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise and then replace it with a new bulb, ensuring it’s secure. Finally, snap the lens cover back into place and test the new bulb to ensure it works.
How do you change the license plate bulbs on a 1999 Chevy Tracker?
i changed a license bulb on my 2000 vitara (should be same as a tracker) grasp the clear plastic lens cover and gently wiggle it back and forth, like pulling a tooth. mine came off intact. after i changed the bulb, i pressed the the lens cover back on. good luck.
How do you change the license plate lights on a 2000 Chevy Tracker?
You don't need to take the whole back panel off to do it!!(learned the hard way) the light cover on the bulb twists out, and it might take some elbow grease to twist it, then the bulb is easy to change.
How do you change the license plate light on a Chevy Malibu?
in back above liscense plate,there should be 2 screws undo these screws, and pull out assembly to change bulb.
How do you put a license plate holder on a 2004 Chevy Malibu?
take off the license plate then screw the holder on with the plate.
How do you change the license plate bulbs on a 98 Chevy silverado?
the plug on the back side of the bumper twists to the left and you pull it out of the bumper
Does the 2001 Chevy cavalier have a rear license plate light?
Yes, all cars have a license plate light. It is mandated by law.
How do you change a license plate lamp in a 2002 Lincoln LS?
How do you change the lamp on the license plate of a lincoln ls 2000?
