Remove the spark plug wire caps from the spark plugs. Remove the spark plugs by turning them to the left with a 5/8 deep well socket.
Same as you normally would in any other car, depends on the spark plugs.
Put the IROC up on jack stands and remove the spark plugs from under the engine.
i cant figure it out either. . . .. . . .the world may never know
its broken
== ==
I have a 1988 corvette I need to change the headlight motor but cant get the motor free from the body This answer is a question.
Screwed into the head.
Not to be disrespectful, however you just answered your own question...if it's a V-6, there are 6 spark plugs!
Pull the wires out of the top of the motor, they have a long plastic boot on the end of the wire. Using a spark plug socket and a long extension you will be able to remove the spark plugs. Check the gap on your new plugs and I like to use a section of hose that fits on the top of the spark plug to to thread the plug back in. That way you reduce the chance of cross threading. Once you get them started you can tighten them down. I usually replace the wires when I replace the plugs. I would suggest replacing the plugs/wires one at a time to reduce the risk of mixing the wires up.
Ngk BR9ES
6.
recheck wires to plugs sounds like two are crossed