If you have to ask,forget it, it`s cheaper to buy a used motor at a junk yard. Are you sure it`s not piston slap making the noise. I`ve had piston slap for the last 70,000 miles and still running strong.
Typical of worn bearings....crank, cam and rod bearings.
4.5 quarts 10w30
I would like to have a dimgram to show me how to put the hater core out and in on my 94 Pontiac Bonneville
It's in your owners manual
2 right passenge side
There is a side pan which is sometimes accesable if you remove the wheel.
Not enough info, please reask question with year, make, model, and engine size.
Calibracion balancines
what are the torque specs for main and rod bearing in 2.2litre s-10
I collect old cavs. The bearing cost between $90-$120CDN. It might be smart to change both bearings at once so they wear evenly. I paid $59.98 for one at NAPA earlier today if that helps....
To change the thermostat on a 1994 Pontiac Bonneville, first, ensure the engine is cool and then disconnect the negative battery cable. Drain the coolant from the radiator, remove the upper radiator hose, and unbolt the thermostat housing to access the thermostat. Replace the old thermostat with a new one, ensuring the gasket is in place, then reassemble by reversing the steps. Finally, refill the coolant and check for leaks.
Could be low level or dirty transmission fluid