answersLogoWhite

0

There is a side pan which is sometimes accesable if you remove the wheel.

User Avatar

Wiki User

21y ago

What else can I help you with?

Related Questions

How do you replace a heater core on a 1994 Pontiac Bonneville?

I would like to have a dimgram to show me how to put the hater core out and in on my 94 Pontiac Bonneville


What is wrong if your 94 Pontiac Bonneville goes into all gears and will drive forward but not reverse and it sounds like it is engaging but won't move?

If your Pontiac runs a 700r4 gm transmission you have stripped a reverse input shell. The transmission needs to come out for repair.


A belt diagram for a 94 Pontiac 3800 supercharged Bonneville?

It's in your owners manual


Manual de reparacion automotriz Pontiac Bonneville SE 94 motor 3800?

Calibracion balancines


Will the transmission out of a 94 Pontiac ssei fit a 94 cutlass supreme?

If it's the same tranny it will.


Is a 94 on a 98 Pontiac grand prix transmission the same?

kindof.


If my 94 Bonneville is cold it will not go into gear would could be the problem?

Could be low level or dirty transmission fluid


Why does 1997 Pontiac Bonneville brake warning light stays on?

I had this problem on a 94 Bonneville after we had fixed the brakes. After I disconnected the battery and reconnected the light went off and the dinging stopped. Not sure if this was related or just coincidence.


Y does the speedometer and tack work on the cluster but nothing else does ON A 94 PONTIAC BONNEVILLE SSE?

you may need to replace some fuses check the box


How do you bypass the ac on as 1994 Pontiac Bonneville?

I just did this on my 94, For anyone else who wants to do it the belt was a NAPA 25-060725 which is 73 1/4 inches long.


Will a 1992 Pontiac Bonneville tranny fit in a 94 Pont Transport if both have the 3 8 engine and overdrive?

Salvage yards have books to tell if they interchange. Check with your local yard.


How do you install ignition lock cylinder in a 94 Pontiac Bonneville?

Attach the wiring harness to the end of the ignition lock cylinder. Slide the ignition lock cylinder into the slot. Tighten the retaining ring at the top of the cylinder.