answersLogoWhite

0

Detach negative battery terminal.

Disconnect large cable from the terminal on the starter motor and solenoid terminal connections.

Remove starter/solenoid mounting bolts (top and bottom).

Separate the assembly from the transmission bellhousing.

Detach and remove starter from engine.

Installation is the reverse.

Also, you might need to jack up the truck and put it on jack stands and turn the wheels to one side to get good access.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Fuel tank capacity of a 1989 Jeep Grand Wagoneer?

20.3 gallons


Why does my 1989 jeep grand wagoneer slip out of gear could it be the modulator valve or bad bands?

filter change low oil front pump


How many miles per gallon does the 1989 jeep grand wagoneer get?

about 7-13 mpg


Where is the vin in a 1989 Jeep Grand Wagoneer?

it is mounted in the dash on the drivers side. It is designed to be see from out side the vehicle.


1989 Jeep Grand Wagoneer - Surges under load in 3rd gear - Why would a 1989 Grand wagoneer surge in 3rd gear under a load ie going up hill?

A few possibilities here. Oil and oil filter issues, fuel injector issues, cam issues.


How to change headlight switch for a 1989 jeep grand wagoneer?

To change the headlight switch on a 1989 Jeep Grand Wagoneer, first disconnect the negative battery terminal to ensure safety. Remove the dashboard panel surrounding the switch, which may involve unscrewing several screws. Then, disconnect the wiring harness from the old switch and remove it by unscrewing any mounting screws. Install the new switch by reversing the process, reconnecting the wiring harness, and reattaching the dashboard panel before reconnecting the battery.


How do you change out the window tracks in a 1989 Jeep Grand Wagoneer?

To change the window tracks in a 1989 Jeep Grand Wagoneer, first, remove the door panel by unscrewing any fasteners and gently prying it off. Next, detach the window glass by removing the bolts or clips holding it in place, then carefully lift it out. Remove the old window tracks by unscrewing or unbolting them from the door frame, and install the new tracks in their place. Finally, reassemble the window glass and door panel, ensuring everything is securely fastened.


Where is the fuse box on a 1989 Jeep Grand Wagoneer?

It is located on the inside of the firewall, left of the steering column. It is way up and hard to see and get to, but it is there!


Where is the fuel pump located on a 1989 jeep grand wagoneer?

It is a mechanical fuel pump located on the engine. It is in the drivers side front below the distributor.


Where is the starter solenoid on the 1989 Mercury Grand Marquis?

its on the passenger side front near the front tire


Where is the VIN on the frame on a 1989 Jeep Grand Wagoneer?

I have not found a vin on the frame. There is one on the dash visible to the outside through the windshield and there is one under the hood on the drivers side on the firewall.


Is a 1988 jeep cheokee bumper the same size as a 1989 wagoneer?

No