Remove all the connections going to the ECM carefully. Remove the 3 bolts that hold the ECM in, remove the ECM. Take the coolant overflow tank out. There is a stud that held the coolant overflow bottle in at the back, remove this by prying it from inside the wheel well. The fan will come out easy after all this is removed.
remove the right side of the dash, remove ductwork. its behind the glove box
Remove the wiring harness from the back of your 1995 Oldsmobile Cutlass blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install your new blower motor.
Its on the fire wall in motor compartment rt next to blower motor. Easy to change ! Five min. Job.
it should be next to the blower motor
fuse, wiring, blower motor, blower motor switch, blower motor resistor
Blower motor is under the dash on the passenger side.
its next to the blower motor
The blower motor resistor is mounted next to the motor on the passengers side under the dash..............
Blown Blower Motor fuse, defective Blower Motor Resistor Pack, or a defective Blower Motor.
On a 1995 Ford Ranger : The heater blower motor is in the ENGINE COMPARTMENT , near the firewall , on the passenger side of the engine
The blower motor is located on the passenger side under the dash and behind the glove box.
Under the hood, on the firewall, passenger side, close to the blower motor.