You will find the blower motor under the hood, on the firewall, passenger side, close to fender. To remove the blower motor, unplug the electrical connection at the blower motor, disconnect rubber cooling tube, remove the 5 small screws holding it in place, then wiggle the blower motor out and reverse procedure to install.U alsohave to remove the black box on top of the washer bottle.
how to change the blower motor
The blower motor is under the glove compartment
There is a removeable panel below the glovebox. It is in front of the blower motor against the firewall. It has a wire connector from the loom and then it plugs into the blower motor
the blower motor relay is located next to the blower motor it is connected to the motor by a purple and black wires
How to change blower motor on 2000 grand am gt
Loose connection or blower motor is bad
Under the hood, passenger side firewall, close to the heater blower motor.
In the dash under the glove box
Please email me a photo of where the blower motor resistor is and how to change it. Thanks, Michael. By the way I want it for a 2000 Sunfire not a Grand Am.
down uner the glove box
No repairing those blower motors, replace it with a new one.
Should be behind the glove box. The blower motor speed resistor is located under the hood, on the firewall, passenger side, close to the blower motor.