How do you change the burned out light on the shift console on a 1998 Oldsmobile intrigue?

Answer 1

STEP 1: Remove the console top
Open the console arm-rest and remove the two bolts near the latch.
Lift the console from the now un-bolted end and carefully pry up from opposite end (there are 4-6 tensioning-pins holding the remainder of console top.
BE CAREFUL - you have a plug in the console top for the traction control.
Lift up the console top and adjust it out of the way.
STEP 2: Remove the shifter position indicator
If you're REALLY god at working in small spaces, you MIGHT be able to remove the bulb socket from the shift indicator without removing it, but realize you have to turn/twist the bulb socket about 90 degrees and then pull down.
The bulb is on the driver's side of the shift indicator. Remove the indicator by removing four bolts and lifting up slightly to gain access. Twist the bulb out of the indicator module, replace bulb, and return bulb socket into the shift indicator.
Turn ignition key on to assure the new bulb is working properly.
STEP 3: Reassemble the console
Place the shift indicator module back in place and put in the four bolts.
Set the console top tension-pins into place and press back down working from dash-end back to console glovebox compartment.
Insert the two console-top bolts back in at latch area of console glovebox.
DONE!