jack each side of the front up individually remove the wheel and ur going to either need a break caliper tool which is a giant Allen wrench or your going to need a socket wrench remove the bolt that holds the caliper together and lift it with ur hand do not let it drop or you'll bust the brake line take a c clamp and depress the brake piston all the way down put the new brake pads on and install it the reverse way of taking it off once both sides are done put the car on the ground get in the car and press that brake pedal with the car off till it's tight then turn the car on and do this a couple times till it's no longer squishy but firm on the pedal.
I replaced the front brakes on my 92 camaro, it still pulls hard right when u hit the brakes??
Same as on every other car.
You will have to remove the transmission and torque converter from the car to get to the front seal.
No
blown brake hose, front passenger side in 1997 chevy malibu?
You have to remove the calipers and brake pads to change the brakes on a Chevy Equinox. There's a how to video included below in the related links section that will show you how to change them.
Just remove the bolt that holds it to the front of the engine and take it off.
Um........no, no you can.
3/8 Allen wrench socket
The 1994 Chevy Camaro horn is located in the front of the engine compartment. The horn will be on the right hand side of the radiator.
How do you change front brake hose on a 1997 lincoln
Sensor should be installed on outer pad leading edge downward on forward rotation