you have to press the wheel studs out of hub after you remove it from the spindle
How do you change front brake hose on a 1997 lincoln
Remove caliper, pull rotor off hub, push new one on.
Get a big hammer and beat it off. Spray penetrating fluid where you think it may get into the rotor to hub surface.
remove wheels.remove brake calipers, remove 4x4 locking hub.with special socket remove axle locking nut. brake rotor will the slide off enabling you to change bearings
you have to unbolt the caliper off the rotor, but not from the brake fluid line.
Same as on every other car.
Take off tire first
when you remove the caliper on the disk brake by removing the bolts on the inside of the caliper the rotor just slides off, the only thing holding the rotor in place is the wheel.
To remove the front brake rotors from a 1997 Mazda Protege, first, lift the vehicle and secure it on jack stands. Remove the front wheels, then remove the caliper by unbolting it from the bracket; hang it securely to avoid strain on the brake line. Next, remove the caliper bracket and then unscrew the rotor retaining screws if present. Finally, slide the rotor off the hub; if it's stuck, gently tap it with a rubber mallet to loosen it.
Take it to a brake shop. If you have to ask you aren't qualified to do it.
Brake pad squealer. Brake pad wear indicator rubbing the rotor. Replace the pads, ASAP.
Remove the wheel; remove the brake pads and caliper; the rotor should slide off of the lug bolts.