0
To remove the front brake rotors from a 1997 Mazda Protege, first, lift the vehicle and secure it on jack stands. Remove the front wheels, then remove the caliper by unbolting it from the bracket; hang it securely to avoid strain on the brake line. Next, remove the caliper bracket and then unscrew the rotor retaining screws if present. Finally, slide the rotor off the hub; if it's stuck, gently tap it with a rubber mallet to loosen it.
What else can I help you with?
How do you remove front brake pads from caliper on 1994 Mazda Protege?
When you remove the caliper, the pads can be pressed out by hand.
Removing front brake rotors on 98 Mazda millenia?
Tap on your 1998 Mazda brake rotors with a hammer or mallet until they become loose. The brake rotors will simply slide off.
High mount brake light replacement Mazda protege 2001?
Remove the high mount brake light retaining screws from your Mazda Protg. Remove the high mount brake light wiring harness. Reverse the process to install your new high-mount brake light.
Where do you add brake fluid in a 1990 Mazda protege?
To add brake fluid in a 1990 Mazda Protege, you need to locate the brake fluid reservoir and check the levels. The reservoir is located on the master cylinder for the brakes.
Where is the brake light switch for the 1997 Mazda protege?
Above the brake pedal,its black plastic.
02 Mazda pro 5 e brake cable loose?
HOW DO I TIGHTEN EMERGENCY BRAKE CABLE ON A 2002 MAZDA PROTEGE 5?
Where is the fuel filter for 96 Mazda Protege?
Next to the master brake cly.
What is minimum brake pad thickness for a Mazda Protege?
about 5mm then after that they will get hot and squeak
How do you remove brake drum on 1991 Mazda 323?
how do remove the brake drum on a 1991 mazda 323
Brake fluid 2000 Mazda Protege?
this is a guess but most Proteges use DOT3
Where is the brake proportional valve located on a Mazda Protege 1995?
behind the engine on the firewall
How do you install front brake pads on a 2001 Mazda protege?
Lift the car with a car jack, remove the tire and set it aside, remove the brake shoe/caliper, and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, put the tire back on the car and lower the car to the ground.
