unbolt the brake caliper wich is the whole brake piece pull that off then check to see if there is a lock washer on the stud, the stud is what your lug nuts go on.if that is not there then safely grab both sides of the rotor and shake it until loose if that doesn't work hit it with a soft hammer on the backside good luck!
Need to know if it is a 4+2 or a 4+4.
Need to know if this is a 2 wheel or 4 wheel drive S10.
jack it up remove the wheel then the brake calipers then the rotors should slide off
Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.
warped brake rotors, have them resurfaced.
Take off the tire, remove the brake caliper, and pull off the rotor.
Purchase a repair manual for that vehicle from your local auto parts store if you are not familiar with brake repair.
It is quite simple to change the brake light switch on your 1998 Chevy S 10 pickup truck. The brake light switch simply plugs in and out.
Change front brake rotors on a 1998 Hyundai Accent?
The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.
Change the brake rotors
Possibly warped brake rotors.