0
If you haven't worked around an airbag before, don't. They are very sensitive and can explode, causing quite a bit of damage and possibly killing YOU. To work on the keyswitch you have to FIRST remove the airbag assembly and the steering wheel. Then you can get to the retaining assembly that holds the lock into place. It's a little different for each vehicle type, but basically it's simple once the airbag and steering wheel are removed. If you insist on removing the airbag you'll need a wheel puller to remove the steering wheel. It's not possible to adequately express the danger involved in messing with airbags if you aren't familiar with them. Just a tiny static discharge will cause it to explode.
What else can I help you with?
What is the spark plug gap for a 2000 Alero six cylinder?
0.60
LOCATION of evaporator alero 2000 SIX Cylinder?
passenger side fender
Replacing the ignition lock cylinder on 2000 Cadillac Catera?
how do you get ignition switch out of steering column in 2000 catera?
How do you remove ignition switch cylinder from 2000 Chevy astro van?
You can remove the 2000 Chevrolet Astro Van the ignition switch cylinder by removing the retaining ring. The retaining ring will need to be turned to the left. The ignition switch cylinder will slide out.
How do you change the lights on the odometer for a 2000 alero?
very carefully!
Does a 2000 olds alero have a timing chain or timing belt?
In a 2000 Oldsmobile Alero : Both the 2.4 litre four cylinder engine and the 3.4 litre V6 engine have a timing CHAIN
Where is ignition switch of 2000 dodge ram 2500?
A retaining clip holds the ignition switch in place on the back of the ignition cylinder on your 2000 Dodge Ram.
How do you remove the ignition cylinder on a 2000 Lexus RX300?
To remove the ignition cylinder on a 2000 Lexus RX300, first remove the vanity engine cover by unscrewing it. Disconnect the wiring connector by pushing the clip that holds it in place. Finally, remove the bolts that hold the ignition cylinder.
How do you remove the ignition lock cylinder on a jaguar x-type?
Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.
How do you change 2000 Ford Focus ignition lock cylinder?
Unless you want to lose your $1200 air bag, take it to an authorized mechanic.
Where are the plug wires on a 2000 olds alero?
You need to remove the engine top cover to access the ignition parts.
How do you change the key tumbler on 2000 Saturn?
To change the key tumbler on a 2000 Saturn, first, remove the ignition cylinder by disconnecting the battery and taking out the steering column covers. Then, insert the key and turn it to the "Run" position while pressing the release pin on the ignition cylinder. Once removed, you can replace the old tumbler with a new one, ensuring it aligns correctly with the new key. Finally, reassemble the ignition cylinder and steering column covers, and reconnect the battery.
