Which bulb, exactly?
The indicator panel should by carefully pried out. Then you can change the bulb.
To change the license plate light on a Pontiac Sunfire, first remove the cover over the bulb with a small screwdriver. Gently push on the bulb and turn 1/4 turn to remove the old bulb. Insert the new bulb and snap in the cover.
You must first remove the trunk door facia. (This is the part with the "Pontiac" lights in it.) Then you can get to the bulb to replace it.
The turn signal bulb? It's done from inside the trunk. Pull the carpet away from the backside of the taillight assembly. The bulb holders just twist out. Replace the bulb, re-seat the bulb holder and put the carpeting back.
make sure you fill up your headlight fluid after you change the bulb
One that fits.......
To change the bulb for the shift indicator light on a 1997 Pontiac Grand Am, first, disconnect the negative battery terminal to ensure safety. Remove the instrument panel by unscrewing the necessary screws and gently pulling it away from the dashboard. Locate the shift indicator bulb socket, twist it counterclockwise to remove it, and replace the old bulb with a new one. Reassemble the instrument panel, reconnect the battery, and test the shift indicator light to ensure it works properly.
how to repair a citreon saxo indicator bulb
You might have to remove the whole tailight bezel to replace that bulb, all the nuts for it are in the rear of the trunk compartment, the type of bulb is a 194 type.
Epic Failure.
take the wheel well out first then reach in and turn bulb socket
I just had to change out the front blinker bulb on my 97 sunfire gt, and as far as I know, there were no huge revisions between the 97 and 98 model year, so here's what you'll need to do. First of all, take out the headlight above the blinker. Your manual should tell you how to do this. Then, simply reach through the hole you've just created to losen the nuts holding the light bulb casing in place, pull it out, and change the bulb. Simple!