Find the screws to pull of the cover. Should be 2 - 4 screws. Save
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
To change the stop light switch on a 1993 Chevy Caprice, first disconnect the negative battery cable to ensure safety. Locate the stop light switch, which is typically mounted on the brake pedal assembly. Remove the connector from the old switch, unscrew the switch from its mounting, and then install the new switch by reversing the process. Finally, reconnect the battery and test the brake lights to ensure proper functionality.
The check gauge light on the 1994 Chevrolet Caprice comes on because there is something on the gauges that requires attention. It is a good idea to take the vehicle to a mechanic when this light comes on.
under the hood in black box
If it's the "change oil" light, turn the ignition to on, but don't start it, and tap the gas pedal 3 times.
It is mounted on a bracket under the dash at the brake pedal. From there it is self explanatory.
Possibly defective or misadjusted brake light switch.
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
Short in switch or wiring. Get this repaired ASAP or you may have a fire. answer replace light switch
the brake light switch is on the top of the brake pedal arm. under dash.
Check the upper end of the brake pedal under dash
undo the screws from inside the trunk after u pull the mat down