0
The same as on any other car. Remove the drain plug from the oil pan and drain out all the oil. Remove the filter, making sure the old gasket comes off, and after applying oil to the new filter gasket, install the filter, tightening it 3/4 turn after it contacts the mounting surface. (NO MORE NO LESS) Replace the drain plug, torquing to 20 lb/ft and pour in the proper amount of the correct weight oil. Start the engine and check for leaks. You are done. Dispose of the old oil and filter at a recycling center.
What else can I help you with?
Could you use 10w40 oil in your 1997 Plymouth breeze?
yes
What is the oil capacity for a 1997 Plymouth breeze 2.4l?
4.5 quarts
What is the engine oil capacity for a 1997 Plymouth Breeze?
4.5 quarts
Can you use 5w-30 synthetic oil in a 1997 Plymouth breeze?
YesYes
Why does the oil light come on in your 1997 Plymouth breeze?
Bad sending unit, low oil, low oil pressure.
How do you change a rear crank oil seal in a 1997 Plymouth Breeze 2.4 liter motor?
The transmission would have to be removed, which is a really big job
How do you change the transmission fluid in a 1997 Plymouth grand voyager?
what do I need to change the 1997 Plymouth voyager transmission oil
How do you stop oil from getting into spark plug tube 1997 Plymouth breeze?
Replace the valve cover and plug tube gaskets.
How much oil do you use in a 98 Plymouth breeze oil change?
A 1998 Plymouth Breeze typically requires about 4.5 quarts of oil for an oil change with a filter replacement. It's important to check the owner's manual for the exact specifications, as variations can occur based on engine type and configuration. Always ensure to use the recommended oil type and viscosity for optimal performance.
Why would oil be in the cooling system in a 1997 Plymouth Breeze?
blown head gasket, cracked cylinder head, crack in the cylinder block
Where is the oil drain plug on a 1996 Plymouth Breeze?
On the bottom of the oil pan.
What type of oil is used in the 1999 Plymouth breeze?
5w30
