Bolt can also be removed through the right front wheel well with wheels turned far to the right.
diagram for serpentine belt on 1996 Pontiac Bonneville se
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
probably
yes
Yes, I need a diagram of the serpentine belt for a 1997 3.8 liter Bonneville SE without a turbo charger.
advance auto if located in your area
take off serpentine belt unbolt powersteering pump and hoses and drain it. That's it.
just need to know where it is located on car
Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
To replace the serpentine belt on a 1998 Pontiac Bonneville with a supercharger, first, ensure the engine is off and cool. Locate the serpentine belt routing diagram, usually found near the radiator or on the engine cover, to understand the belt's path. Use a wrench or socket to relieve tension on the belt tensioner, then remove the old belt. Finally, install the new belt following the routing diagram, ensuring it's properly seated on all pulleys before releasing the tensioner.
there is no difference between the 2..to be sure when u go to the parts store have him check it out..
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.