0
First locate the belt tensioner. On the 3.0L (88 - 90) it takes a 1/2 inch breaker bar to release the tension lift the breaker bar towards the top of the engine (Counter Clock Wise). On 3.3L and 3.8L you pull the breaker towards the front of the van (Clock Wise). Here are a couple pictures [http://www.goodoil4u.com/images/Serpentine_Belt1.jpg Belt 1] or [http://www.goodoil4u.com/images/Serpentine_Belt.jpg Belt 2] Good Luck and Remember.
Change Your Mind, Not Your Oil.
Use the First In Synthetic Motor Oil's.
See My Bio For more information.
What else can I help you with?
How do you change the serpentine belt on a 2002 Chrysler town and country mini-van 3.8 engine?
There should be an idler pulley that you need to loosen to take belt off, draw a diagram of how the belt looks before you take it off so you can see how it goes back on.
Why does Mini cooper battery light stay on and loss of power steering?
Check to make sure the serpentine belt is still in place.
What makes the serpentine belt come off the power steering pump on a 1994 Dodge mini van?
Hey you..Guessin its a 3.3l v6, On all single endless serp belt set ups that are randomly throwin belts immediate att must be directed to the belt tensioner and verification of the correct belt for the application..phase 2 involves checking all related appliances and pulleys for proper operation and alignment before the new belt goes on.
When should you change the timing belt on a 2003 mini cooper?
It doesn't have a timing belt, it is a cam chain driven engine
1993 town and country the belt has been coming off in wet weather has been in shop every thing is allined and no guards are missing any ideas?
I've had multiple Dodge/Chrysler/Plymouth mini-vans that suffered this "belt being thrown off issue", especially in wet weather. Via lots of trial/error and research I discovered that if you go thru a puddle of water or snow at say 30 MPH or more, that impact of water/snow on the tire will send up a big splash of snow/water right into the pulley(s) on which the serpentine belt is mounted and the result is the belt being thrown off. Later model Dodge/Chrysler/Plymouth mini-vans had a plastic shield mounted on the inner front fender to deflect this big splash. If you can find one of these "splash deflector shields", with a little "butchering" they can be made to fit your older Dodge/Chrysler/Plymouth mini-van(s)
Does a 2000 Toyota mini van have a timing belt or chain?
timing belt
Does a BMW mini have a timing belt or chain?
Timing chain on the mini 2001-2006
Will a 1991 Plymouth mini van hitch fit 2001 dodge mini van?
No, it will not fit.
How do you change a radiator for a mini cooper?
How to change a radiator in a 2008 mini cooper
Is it possible to eliminate the air conditioning compressor and install a shorter serpentine belt on a 2001 Chrysler town and country mini van?
I did it on a 2002 T&C about 2 years ago and have not had any issues. I took out the a/c relay also. I kept the package to the shorter belt and if you want I can tell you the size - not sure if 01 and 02 are the same, though.
How do you change headlights for a mini cooper?
were do I put stickers on headlamps to change to Europe on a mini cooper
Do they make belt buckle for 22 mag mini revolver?
NAA does not.
