0
How do you change the spark plugs in a 2001 Pontiac Aztek Is there a special tool to reach the 3 spark plugs that are on the back side of the motor?
In order to replace the spark plugs on the back side of the motor, you must rotate the engine after removing the engine mount strut bolts. There is a special tool (J41131) to hold the engine properly for this procedure.
Disconnect the battery, remove hot wire from alt. Disconnect any hoses in front of coil pack, disconnect electrical plugs at alt., coil pack and move harness to side. remove screws that hold coil pack to bracket. There is enough room to get at the plugs and remove them
......put the car on a rack and go from the underside with a specialty tool. that's how mine were done
Answer #2 - Special tools and engine rotation isn't necessary. Put the front of the Aztek on ramps then set the emergency brake and chock the rear tires. You will be working under the car. Get a 3/8 inch ratchet with a long extension, a swivel, a spark plug socket and a standard deep well socket. Use the spark plug socket for removing the old plugs and the standard socket for installing the new plugs. The spark plug socket has rubber inside that holds tightly to the plug and this will make it difficult to remove from the new plug once tightened due to the limited working space. Progress will be slow and you will rely on feel. Positioning yourself and maintaining position will be somewhat difficult but the work itself is easy.
What else can I help you with?
How to change Pontiac aztek 2003 windshield wiper motor?
To change the windshield wiper motor on a 2003 Pontiac Aztek, first disconnect the negative battery cable to ensure safety. Remove the wiper arms by loosening the nuts at their bases and lifting them off the motor shaft. Next, access the wiper motor by removing the necessary interior panels and disconnecting the electrical connector. Finally, unbolt the motor from its mount, replace it with the new motor, and reassemble in the reverse order.
How do you rock the engine forward on a Pontiac Aztek?
putin a alternater in how you rock the motor forward .
What color of coolant for the 2002 Pontiac aztek?
Green. The 3.4 motor does not have any aluminum parts internally, so green is standard.
How do you replace the blower motor on a 2004 Pontiac aztek?
To replace the blower motor on a 2004 Pontiac Aztek, first disconnect the negative battery cable to ensure safety. Remove the passenger side lower dash cover and the blower motor's electrical connector. Unbolt the blower motor from its housing and carefully pull it out. Install the new blower motor by reversing the steps, ensuring all connections are secure before reconnecting the battery.
Which fuse is for the blower motor in a Pontiac aztek?
In a Pontiac Aztek, the fuse for the blower motor is typically located in the fuse box under the dashboard on the driver's side. It is usually labeled as "HVAC" or "Blower" in the fuse diagram. For the exact fuse number and specifications, it's best to consult the owner's manual or the fuse box cover for detailed information.
How do you replace wiper motor Pontiac aztek?
To replace the wiper motor on a Pontiac Aztek, first disconnect the negative battery cable for safety. Remove the wiper arms by taking off the retaining nuts and gently pulling the arms off the splines. Then, access the wiper motor by removing the screws or bolts securing it in place, disconnect the wiring harness, and replace it with the new motor. Reassemble everything by reversing the disassembly steps, ensuring all connections are secure.
How do you replace windshield wiper motor on 03 Pontiac aztek?
To replace the windshield wiper motor on a 2003 Pontiac Aztek, first disconnect the negative battery cable to ensure safety. Remove the wiper arms by loosening the nuts and gently prying them off. Then, access the wiper motor by removing the necessary panels or covers under the dashboard or hood, depending on the motor's location. Finally, detach the old motor's electrical connector and mounting bolts, install the new motor, and reassemble everything in reverse order.
Why is the AC blower in my Pontiac Aztek not working?
The AC blower in your Pontiac Aztek may not be working due to several potential issues, such as a blown fuse, a malfunctioning blower motor, or a faulty blower motor resistor. Additionally, there could be problems with the HVAC control switch or wiring. It's advisable to check the fuses first and then test the blower motor and resistor for proper functionality. If these components are functioning correctly, further diagnosis may be needed.
How do you replace an alternator in a 2003 Pontiac aztek?
To replace the alternator you must tip the motor. by removing the motor mounts in front on the motor.just the two top ones and than roll the motor forward. that will give you enough room to remove the alternator
Where is the starter solenoid in a 2003 Pontiac aztek?
In a 2003 Pontiac Aztek, the starter solenoid is typically mounted on the starter motor itself. You can find the starter motor located on the lower part of the engine, near the transmission. Access may require getting under the vehicle, and it is often easier to reach from beneath or through the wheel well. Always ensure the vehicle is securely lifted and supported before attempting any work.
What type of oil required for 2005 Pontiac Aztek?
The 2005 Pontiac Aztek typically requires 5W-30 motor oil for optimal performance. It's important to use oil that meets the API (American Petroleum Institute) certification for the best results. Always refer to the owner’s manual for specific recommendations regarding oil type and maintenance.
How do you fix an electric window that won't go up on a 2003 Pontiac AZTEK?
To fix an electric window that won't go up on a 2003 Pontiac Aztek, first check the fuse related to the power windows and replace it if necessary. If the fuse is fine, inspect the window switch for any signs of damage or wear, as it may need to be replaced. Additionally, ensure that the window motor is functioning; you can test it by applying direct power to it. If the motor doesn't work, it may need to be replaced.
