To replace the wiper motor on a Pontiac Aztek, first disconnect the negative battery cable for safety. Remove the wiper arms by taking off the retaining nuts and gently pulling the arms off the splines. Then, access the wiper motor by removing the screws or bolts securing it in place, disconnect the wiring harness, and replace it with the new motor. Reassemble everything by reversing the disassembly steps, ensuring all connections are secure.
To replace the windshield wiper motor on a 2003 Pontiac Aztek, first disconnect the negative battery cable to ensure safety. Remove the wiper arms by loosening the nuts and gently prying them off. Then, access the wiper motor by removing the necessary panels or covers under the dashboard or hood, depending on the motor's location. Finally, detach the old motor's electrical connector and mounting bolts, install the new motor, and reassemble everything in reverse order.
To change the windshield wiper motor on a 2003 Pontiac Aztek, first disconnect the negative battery cable to ensure safety. Remove the wiper arms by loosening the nuts at their bases and lifting them off the motor shaft. Next, access the wiper motor by removing the necessary interior panels and disconnecting the electrical connector. Finally, unbolt the motor from its mount, replace it with the new motor, and reassemble in the reverse order.
To remove the windshield wiper motor from a 2002 Pontiac Aztek, first, disconnect the negative battery terminal to ensure safety. Then, remove the wiper arms by loosening the nuts at their base and gently pulling them off. Next, access the wiper motor by removing any necessary panels or trim, and disconnect the wiring harness. Finally, unbolt the motor from its mounting bracket and carefully take it out.
You will need to take out the whole motor to replace it. It is usually best to get a mechanic to take care of it.
$55.00 for the part and $75.00 to install. So $130.00
where is the location wiper motor Pontiac grand prix 2002
To replace the front wiper motor in a Pontiac Montana, start by disconnecting the negative battery terminal to ensure safety. Remove the wiper arms by lifting the caps and unscrewing the nuts, then pull the arms off the splines. Access the wiper motor by removing the plastic cover and any necessary components obstructing it. Finally, disconnect the motor's electrical connector, unbolt the motor from its mounting bracket, and install the new motor by reversing these steps.
To adjust the wiper arm on a 2001 Pontiac Aztek, first, lift the wiper arm away from the windshield and locate the nut securing the arm to the wiper motor shaft. Use a socket wrench to loosen the nut slightly, then reposition the wiper arm to the desired angle. Tighten the nut back securely and test the wipers to ensure they function correctly. Finally, lower the wiper arm back onto the windshield.
chances its not the motor but the wiper module board located on the wiper motor. just remove the wiper motor and the module board is connected to it.
Yes, you can generally replace the front wiper motor on a Pontiac Montana with one from a Pontiac Transport, as both vehicles share similar components and designs. However, it's essential to verify that the part numbers and electrical connections are compatible. Always consult the vehicle's service manual or a professional mechanic to ensure proper fit and function before proceeding with the replacement.
How to replace wiper motor on a 1998 montero sport mitsubishi
how do you replace rear wiper motor on a 1997 ford explorer