putin a alternater in how you rock the motor forward .
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
To replace the alternator you must tip the motor. by removing the motor mounts in front on the motor.just the two top ones and than roll the motor forward. that will give you enough room to remove the alternator
The motor is under the plastic grill that is at the bottom of the windshield. It's held in place by a bunch of plastic "rivits" that you have to remove to get the grill out.
To replace the wiper motor on a Pontiac Aztek, first disconnect the negative battery cable for safety. Remove the wiper arms by taking off the retaining nuts and gently pulling the arms off the splines. Then, access the wiper motor by removing the screws or bolts securing it in place, disconnect the wiring harness, and replace it with the new motor. Reassemble everything by reversing the disassembly steps, ensuring all connections are secure.
The windshield wiper motor is located just below the windshield wiper blades and is covered by a black panel.
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
Green. The 3.4 motor does not have any aluminum parts internally, so green is standard.
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
Remove the wiring harness from the back of your 1993 Mercury Villager windshield washer motor pump. Remove the windshield washer pump hoses. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer motor pump.
There is no fuse the motor burns out. There is a fuse for the WIPER MOTOR