Very easily except for cyl #5 and #6. Remove the 2 10mm bolts holding the airbox on and loosen 2 clamps for air intake hose. You will see the 6 coils, remove 10mm bolt holding coil in place, lift out coil and spark plug is readily accessible. Cyl #5 and 6 are a little tight, but not impossible with the right length ratchet ext. hope it helps.
To change the spark plugs on a 1999 Oldsmobile Bravada, first, ensure the engine is cool and disconnect the negative battery cable. Remove the ignition coil or spark plug wires from the spark plugs, then use a spark plug socket and ratchet to carefully unscrew the old plugs. Before installing the new plugs, check the gap with a gauge and adjust if necessary. Finally, insert the new plugs, torque them to the manufacturer's specifications, reconnect the wires or coils, and reconnect the battery.
how do change the spark plugs and the coil pack on a 2000 Oldsmobile intrigue
where would the spark plugs at on a Oldsmobile 1989 engine
On a 2001 Oldsmobile Bravada, the spark plugs are located on the engine's cylinder heads. Specifically, they can be found beneath the engine cover, which may need to be removed for access. The vehicle is equipped with a 4.2L inline-six engine, and the spark plugs are positioned near the ignition coils. To reach them, you may need to remove the ignition coil packs and any other components obstructing access.
Remove your front tires and look up under the fender cowel and you sill see the sparks plugs. I have to change mine and when I changed my Ball Joints I notice that that will be the easiest way to get to them. That and a long extension
You fouled the spark plugs, replace and it will start. I just worked on one yesterday with this problem
don't have my manuel how many spark plugs are there in a 1997 cutlass supreme oldsmobile. need to change them all v6 engine. what is the best brand to buy thank you
To change the spark plugs on a 1997 Oldsmobile Achieva, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires from the spark plugs, being careful not to damage them. Use a spark plug socket and ratchet to unscrew the old plugs, then install the new plugs, ensuring they are gapped correctly. Finally, reconnect the ignition components and the battery terminal.
6 spark plugs 1 spark plug to every cylinder.
6 spark plugs
The spark plugs are on the front and back of a V6 (back ones are tough to get to) L4 right in front. Turn the engine off and take off the spark wires unscrew the plugs
when do you change spark plugs