To change the thermostat in an Oldsmobile Bravada, start by ensuring the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one (ensuring the gasket is properly aligned), and reassemble the components in reverse order. Finally, refill the cooling system with coolant and check for leaks.
You didnt say what year and what engine
push the bottom far right then left then to the degrees u want<>=] Diagram of where the thermostat goes and how to install it.
The thermostat is located on a 2003 Oldsmobile Alero in the thermostat housing. The thermostat housing is located on the rear side of the engine block.
To change the thermostat in a 2004 Oldsmobile Silhouette van, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator and remove the upper radiator hose to access the thermostat housing. Unbolt the thermostat housing, remove the old thermostat, and clean the mating surfaces before installing the new thermostat with a new gasket. Reassemble everything, refill the coolant, and reconnect the battery.
Follow the top radiator hose to the engine and find a bulborous part device the hose is attached to. The thermostat is inside there.
GM vehicles do not use inertia/reset switches.
wheres the thermostat on a 2001 Oldsmobile aurora
To change the thermostat in a 2001 Oldsmobile Silhouette, first ensure the engine is cool and disconnect the negative battery cable. Drain the cooling system by removing the radiator cap and opening the drain valve. Then, locate the thermostat housing, remove the bolts, and take off the housing to access the thermostat. Replace the old thermostat with a new one, ensuring the gasket is properly seated, reassemble the housing, refill the cooling system, and reconnect the battery.
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.
remove old thermostat and replace with new thermostat and gasket
First, remove the thermostat housing. Then grab the thermostat by hand and remove it.
Originally yes