0
Place vehicle on ramps to gain acess to underside. Set Park brake and chock rear tires to prevent rolling off ramps. Get a large pan (3-4 gallon capacity) and place under tranny. Remove MOST of pan bolts. Leave one on each corner. loosen lowest two corner bolts. Gently pry pan loose and allow fluid to drain. Remove pan and replace filter. Clean pan (PUT MAGNET BACK WHERE IT WAS IN PAN) then re install using appropriate gasket. Do not over tighten bolts as they can strip out. I believe 14-16 ft lbs torque is correct Please note this will not remove old fluid from torque converter. You must go to a shop and have it flushed for this degree of completion.
What else can I help you with?
How do you change the transmission fluid in a 1997 Plymouth grand voyager?
what do I need to change the 1997 Plymouth voyager transmission oil
How do you change the transmission fluid in a 1999 Plymouth Grand Voyager?
Remove transmission oil pan for access to filter. Replace pan gasket, fluid and filter
What transmission fluid for 1998 grand voyager?
Lubrication Engineers Trans-All EHP Automatic Transmission Fluid, product #1150
How many quarts of fluid do you need for a transmission filter and fluid change in a 1995 Plymouth Grand Voyager Van?
Usually about 5.Usually about 5.
What auto transmission fluid goes into a Chrysler grand voyager se?
ATF+4
What kind of transmission fluid you use for Chrysler grand voyager se?
ATF+4
What type of transmission fluid should you use for a 1998 Plymouth Grand Voyager?
Mopar ATF+4
What transmission fluid for 1999 grand voyager?
Mopar ATF+4Mopar ATF+4
What kind of transmission fluid do you use in a 96 grand voyager?
ATF-4 any local car parts store
How many quarts of ATF fluid with filter change for 2000 Chrysler grand voyager se?
About five
How do you change the thermostat in a grand voyager?
where is thermostat in 2000 chrysler grand voyager ??
What is the capacity of the transmission fluid pan on a 1997 Plymouth Grand Voyager SE 3.3L?
It will take about five quarts if only the pan is removed.
