Remove the transmission oil pan for access to filter
Replace fluid, filter and gasket
You cannot "convert" an AWD transmission to 2WD or vice versa, you'd have to take the whole thing apart.
To change the transmission fluid in a 2012 Subaru Impreza AWD with an automatic transmission, first ensure the vehicle is on a level surface and warm the engine slightly. Remove the transmission pan bolts and carefully lower the pan to drain the old fluid, then replace the filter if applicable. Reinstall the pan with a new gasket, refill the transmission through the dipstick tube using the recommended fluid, and check the level with the engine running. Finally, ensure there are no leaks and dispose of the old fluid properly.
awd
it uses a Delco synthetic transmission fluid on the CVT 4 cylinder transmission and ATF on the V6
The automatic transmission takes Motorcraft MERCON - " V " - automatic transmission fluid The transfer case takes Motorcraft MERCON - automatic transmission fluid
How many qts of automatic transmssion fluid in a 2003 escalade AWD
Mopar ATF+4
Power take off unit. Takes AP4 transmission fluid.
Sounds like automatic transmission fluid ( If the transmission has been overfilled or has got water in it once the transmission is warmed up the fluid expands and can come out the vent tube ) or it can be a leak ( the transfer case for the AWD system and the Control Trac 4x4 system also has automatic transmission fluid inside it and the power steering system also uses automatic transmission fluid )
For a 1997 Eagle Talon AWD Turbo with a manual transmission, it is recommended to use a high-quality synthetic gear oil that meets the specifications of API GL-4. Typically, a 75W-90 weight fluid is suitable for this application. Always check the owner's manual for any specific manufacturer recommendations and ensure the fluid is compatible with the transmission.
no
use only Toyota tranny fluid 4 quarts do not use any atfer market fluid you'll be sorry if you do.