how you change the wiper linkage bushing requires you to take off the wiper blades and vent off the top off the dak
there should be about 8-9 screws maybe less, then when the vent is removed, there will be a plastic vent with plastic clips, simply lift up one edge of vent it should just pop out the do the same with other clip, when vent is lifted up unplug the rubber tubing from spray nozzle then repeat with other tube, when plastic vent is removed you should be able to see the wiper linkage crank and wiper arms there you should see the bushing simply pull the wiper linkage and remove the bushing and replace.
Images of the wiper linkage for a Dodge Dakota are located in the service manual. It details where the linkage connects and how to perform maintenance on it.
Its a dealership part
The wiper linkage is bad. Or the wiper arm stud bushings (where the arms attach to the cowl) are rotted out.
Linkage bushings on wiper arms coming off back side of wiper motor under cowling
The linkage bushing is located under the Crowl grill. Remove wipers and grill.
You should change the oil in a Dodge Dakota every 3000 miles.
howdo you change the front axel of a dodge Dakota 2000 4x4
Have you ever had the linkage adjusted? 90% chance this is the problem.
Check the fluid level. Check the linkage. Check all computers for trouble codes.
It is on the throttle body, Opposite of where the cables hook on the throttle linkage.
Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.
The neutral safety switch is located on the side of the transmission at the linkage connection. Unhook the wiring connector, Disconnect the linkage, then unbolt the switch to replace it.