The linkage bushing is located under the Crowl grill. Remove wipers and grill.
Images of the wiper linkage for a Dodge Dakota are located in the service manual. It details where the linkage connects and how to perform maintenance on it.
It is on the throttle body, Opposite of where the cables hook on the throttle linkage.
The neutral safety switch is located on the side of the transmission at the linkage connection. Unhook the wiring connector, Disconnect the linkage, then unbolt the switch to replace it.
A 1997 Dodge Dakota does not have an EGR Valve.
Were is the ecm located on a 2001 dakota
There is no cabin filter on a 2004 Dodge Dakota.
The starter solenoid on a Dodge Dakota is built on the starter.
how you change the wiper linkage bushing requires you to take off the wiper blades and vent off the top off the dak there should be about 8-9 screws maybe less, then when the vent is removed, there will be a plastic vent with plastic clips, simply lift up one edge of vent it should just pop out the do the same with other clip, when vent is lifted up unplug the rubber tubing from spray nozzle then repeat with other tube, when plastic vent is removed you should be able to see the wiper linkage crank and wiper arms there you should see the bushing simply pull the wiper linkage and remove the bushing and replace.
Have you ever had the linkage adjusted? 90% chance this is the problem.
Check the fluid level. Check the linkage. Check all computers for trouble codes.
The heater core on a Dodge Dakota is inside the HVAC housing, under the dash.
The obd port on a 1990 Dodge Dakota is under the hood, along the firewall..