0
First of all, I'd recommend you to buy the correct transmission oil from the dealer.
Dropping the transmission pan can only change a small portion of the automatic Transmission Fluid (ATF), because most of the fluid is in the Torque Converter. Unless you are also changing the filter, I'd recommend you to do the flush through the transmission cooler line.
1) Find the transmission cooler return hose (on my 08 Fusion, if you sit on the driver's seat, it is the one that is leftmost).
2) Disconnect the cooler return hose from the transmission end.
3) Put the hose into a container with graduated scales.
4) Start the engine (to idle only to avoid damage), when you see 3 Qt of ATF flows out, turn off the engine.
5) Fill 3 Qts of ATF through the transmission oil stick.
6) repeat 3) and 4) three times
7) reconnect the cooler return line
8) fill transmission fluid to the required level (be aware, when you check the transmission fluid, the engine should be running, and you should let the Stick lever go through all the gears beforehand).
What else can I help you with?
How do you change transmission fluid on a 2011 Ford Fusion?
To change the transmission fluid on a 2011 Ford Fusion, first, ensure the vehicle is on a level surface and the engine is warm. Remove the transmission fluid drain plug to let the old fluid drain out completely. Replace the drain plug, then use a funnel to add the new transmission fluid through the dipstick tube, referring to the owner’s manual for the correct type and amount. Finally, check the fluid level with the dipstick to ensure it’s at the proper level.
How many quarts of transmission fluid is required to change transmission fluid in a 1993 150 Ford Van?
How many quarts of transmission fluid is required to change transmission fluid in a 1993 150 Ford Van?
How do you change transmission fluid on 1998 ford zx2?
How do you change transmission fluid in 98 zx2
How do you change the transmission fluid on a 94 Ford Aerostar?
where to put transmission fluid at in 93 ford areo star
Can you change the transmission filter and the transmission fluid in a Ford Contour 1996?
you can change the fluid, but not the filter. drain the fluid from the drain plug on the bottom of the transmission and refill from the dipstick. the filter is only accessable by overhauling the transmission
How would one change the transmission fluid on a manual 1998 ford escort zx2?
To change the transmission fluid on the manual 1998 Ford Escort ZX2, drain the fluid from the drain hole near the speed sensor. Then refill the fluid using the plug in the side of the transmission.
How many quarts of transmission fluid do you need to change a 2005 ford crown Victoria?
It is important to replace old transmission fluid with the right amount of new transmission fluid. The 2005 Ford Crown Victoria has a transmission fluid capacity of 5 quarts.
How to change the automatic transmission fluid in a Ford Ranger?
The best thing to do is to take it to a repair shop that has a transmission flushing machine. That will change all of the fluid in the system.
Can you use dexron 2 in your Ford Fusion?
No, you should not use Dexron II in your Ford Fusion. Most modern Ford vehicles, including the Fusion, require specific transmission fluids that meet Ford's specifications, such as Mercon LV or Mercon ULV, depending on the model year. Always consult your owner's manual to determine the correct fluid type for your vehicle. Using the wrong transmission fluid can lead to poor performance and potential damage.
How do you change the transmission fluid on a 1993 Ford Tempo?
Remove transmission oil pan for acces to filter Replace fluid, filter, and gasket
How often do you change transmission fluid in 2003 ford ranger 2.3L?
every 100k when using AMSOIL Synthetic Universal Transmission Fluid
When to change transmission fluid 2001 ford e350 7.3?
mercon atf
