start up your bronco,let it idle, pull the tranni dip stick and see if there is nay oil in the tranni
The Ford Bronco transmission can use any SAE certified transmission fluid. Ford transmissions manufactured before 1979 will need an F type transmission fluid.
To check the transmission fluid in a 1988 Ford Bronco, first ensure the vehicle is parked on a level surface and the engine is running. Locate the transmission dipstick, which is typically found near the back of the engine compartment. Pull out the dipstick, wipe it clean, reinsert it fully, and then remove it again to check the fluid level. The fluid should be within the marked range on the dipstick, and you can also check the fluid's color and smell for signs of contamination.
Mercon
12 TO 14 QUARTS
Through the dipstick tube
Dex\Merc
how to check the fluid on a ford freestyle transmission
how to check the fluid on a manual transmission for a 1989 ford probe gt
I'd suggest using a Dextron III/Mercon automatic transmission fluid.
Remove the cap and check the level when the fluid is hot.
12 quarts
The same place you check the transmission fluid