answersLogoWhite

0

With an OBDII diagnostic code reader. You can usually rent/borrow one from places like Schucks/Pep boys. There is a socket under the dashboard on the drivers side that the unit plugs into.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Where is diagnostic port for 2001 Oldsmobile intrigue?

The diagnostic port for a 2001 Oldsmobile Intrigue is located under the dashboard on the driver's side. Specifically, you can find it near the steering column, typically just above the pedal area. It's a rectangular connector that allows for the connection of an OBD-II scanner to read diagnostic trouble codes.


How do you clear the codes on 2002 Oldsmobile intrigue for the air pump?

You'll need an OBD/II compatible scantool to clear the codes.


What causes the check engine light to come on a 2000 Oldsmobile Intrigue blink and then go out and sometimes stay on for a while?

Have vehicle scanned to see if any codes are stored to determine the problem


How do you know when the oxygen sensor needs to be replaced in a 1999 Oldsmobile Intrigue?

Our check engine light was on in our 1998 Intrigue. We went to Autozone and they pulled the codes and saw that it was either one (or both because they said there was 2). If your light is not on I am not sure how to find out otherwise. Autozone said that it tripped our light.


That is the trouble shooting codes for a 1991 Oldsmobile cutlass ciera?

my car turn over,but will nostart.


How do you read trouble codes in a 1991 Oldsmobile ninety-eight?

To read trouble codes in a 1991 Oldsmobile Ninety-Eight, you need to locate the diagnostic connector, typically found under the dashboard near the steering column. Use a jumper wire to connect terminals A and B of the ALDL (Assembly Line Diagnostic Link) connector. Then, turn the ignition key to the "On" position without starting the engine; the check engine light will blink the trouble codes in a series of flashes. Count the flashes to interpret the codes, which can be referenced in a repair manual for further diagnosis.


Where is the transaxle reset on Chrysler Concorde?

Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.


Your engine light came on what do you check?

you check the system for trouble codes.


How do you turn off the check engine light in a 2001 Oldsmobile Aurora?

Read the codes. Then fix the problem. Autozone will read the codes for you for free.


Why can t you get trouble codes when check engine light on a 01 civic?

If you can not read codes with a scanner you have a wiring problem.


Dodge Dakota transmission troubleshooting?

Check the fluid level. Check the linkage. Check all computers for trouble codes.


2002 check engine light codes dodge neon?

See link below for a complete list of trouble codes.