To clean the Mass Air Flow Sensor (MAFS) on a 1998 Ford Windstar, first, ensure the engine is off and disconnect the negative battery terminal. Remove the MAFS by unscrewing the screws and disconnecting the electrical connector. Use a specialized MAF sensor cleaner spray and apply it to the sensor element without touching it. Allow it to dry completely before reinstalling the sensor and reconnecting the battery.
You can get MAFS cleaner at any auto parts store and of course you want to clean the part that goes inside the air tube. Dirt or build up is rarely the problem thogh.
Replace freeze plug in a 1998 ford windstar ?
Not likely - the 1999 Windstar was a rather significant updating of design compared to 1995-1998 models.
A 1998 Ford Windstar would use refrigerant 134a
On a 1998 Ford Windstar : The 3.8 liter V6 engine ( and the 3.0 ) has a timing CHAIN
Not very likely - the Windstar was significantly redesigned in 1999, and the dimensions of the vehicle were changed.
Mostly in the Windstar category - they all apply to the GL model
On the evaporator case.
On a 1998 Ford Windstar : ( # 16 / 20 amp )
On a 1998 Ford Windstar ( 3.0 and 3.8 ) firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
There is no carburetor on a 2001 Ford Windstar engine because the engine is fuel injected
On the underside of the engine.