0
What else can I help you with?
Need to increase the idle RPM on your 1991 thunderbird sc how can you do that?
If you need to increase the idle you either have a vacume leak or the iac (idle air control) valve needs replace. Because this motor are control eletronicly.
Where do you set the idle on a 1991 dodge cummins pick up?
You will want an idle speed between 750 and 900 rpm with the ac on and in gear (if auto).You will want an idle speed between 750 and 900 rpm with the ac on and in gear (if auto).
How do you adjust the idle speed on a 1991 Volvo 740?
To adjust the idle speed on a 1991 Volvo 740, locate the idle adjustment screw on the throttle body. Start the engine and allow it to reach normal operating temperature. Use a tachometer to measure the idle speed, then turn the adjustment screw clockwise to increase the idle speed or counterclockwise to decrease it, ensuring it stays within the recommended range of 750-900 RPM. Finally, recheck the idle speed to confirm the adjustment and ensure the engine is running smoothly.
What would cause a 1978 Datsun 280Z to idle at 2500 RPMs?
z idle adjustmentTurn the idle screw - on the intake manifold - clockwise to decrease rpm or counterclockwise to increase idle. You should also look around for a vacuum leak
How to adjust idle speed on 1978 Seville?
To adjust the idle speed on a 1978 Cadillac Seville, locate the idle speed screw on the carburetor. Start the engine and let it reach operating temperature. Use a tachometer to monitor the RPM, then turn the idle speed screw clockwise to increase RPM or counterclockwise to decrease it, aiming for the factory-recommended idle speed (usually around 600-700 RPM). Finally, recheck the idle after adjustments and ensure the engine runs smoothly.
What should be the RPM reading when hot on a 1999 jeep Cherokee?
It will idle as low as 600 rpm.It will idle as low as 600 rpm.
What is the idle RPM for a 1.8L integra?
when u first start the car it will idle high, around 1.5 rpm to 2 rpm. when its warm up it should idle between 700-1000 rpm
What would cause your 1991 Chevy Camaro v6 to idle erratic between 2000 and 2500 RPM?
Driver error.
What is the RPM speed recommended for setting the timing on 1991 mustang 5.0?
Timing and idle setting maybe computer controlled and not adjustable. If they are adjustable should be 825-850 RPM
How do adjust idle on a 2009 street glide?
To adjust the idle on a 2009 Harley-Davidson Street Glide, first ensure the motorcycle is at operating temperature. Locate the idle adjustment screw on the throttle body, typically found near the intake manifold. Use a screwdriver to turn the screw clockwise to increase the idle speed or counterclockwise to decrease it, aiming for the recommended idle RPM of around 950-1,050 RPM. Always make small adjustments and check the RPM after each change to achieve the desired idle speed.
What is the idle RPM on a 1999 Toyota 4 runner?
the RPM should idle 700 - 900
What is the RPM at idle for 86 cutlass supreme?
the idle should be about 900 RPM in park or neutral.
