0
What else can I help you with?
How do you disable the daytime running lights on a 2002 GMC sierra pickup truck?
push in on your dome override button twice. Note you will have to do this everytime you shut it off. the engine has to be running when you do this,this also disables the automatic headlights. Hope this helps.
When the Chevrolet silerado truck is running the lights wont work but when you shut the truck off they turn on?
Daytime running light module may be the problem
Where is the daytime running lights module on a 1997 Chevrolet S-10 pickup truck?
daytime running lights for chevys are automatic. you cant turn them off. all you can do is control the high and low beams.
How do you turn off lights with truck running on 2011 Ford F-250?
If you mean the daytime running lights , just put your emergency / parking brake on when you are parked
Install daytime running lights on Nissan Frontier?
If you cut the wire from the light switch to the frount running lights (single use light) you can then hook a new wire from a keyed power source (check manuel) and the running lights will come on every time you start the truck. costs $Priceless
How do you disable the daytime running lights on a 1997 GMC sierra pickup truck?
By depressing the parking brake only one(1) click so that it will not engage the brake, but the lever will stay down, this will disable the daytime driving lights. The parking brake indicator light will stay lit on the instrument panel however. It's simple.There is a fuse in your fuse box that you can take out and it will disable the lights. It's either fuse # 2,5,15,22, or 23. The little green light in the upper left portion of your instrument panel will still operate as if the lights have never been de-activated. It will stay lit until you manualy turn your headlights on, then it will go out.
How do you disable kenworth drl?
To disable the Daytime Running Lights (DRL) on a Kenworth truck, locate the DRL fuse in the fuse box and remove it. Alternatively, some models may allow you to disable the DRL through the vehicle's dashboard settings or by adjusting the headlight switch. Always consult your owner's manual for specific instructions related to your model year. If you're unsure, it's advisable to seek assistance from a qualified technician.
A man was driving a black truck His lights were not on The moon was not out A lady was crossing the street How did the man see her?
It was daytime.
When you turn off your truck the daytime running lights stay on when you turn the headlights on you have no high beams?
== == Sounds like a defective head light switch to me. Have a mech check it with a curcuit tester to see which contacts are not live.
How do you disconnect the constant on headlights?
Not sure on the disconnect part, but after you start the truck, push your dome light on and off 4 times, you will hear it chime, the daytime running lights will then be out. But you gotta do it each time you start the vehicle....
Why do the daytime running lights on a rebuilt 2003 Chevy Silverado pickup only work when the unlock button is pushed on the keyless entry?
Evidentally the lights were wired up wrong. You will have to take ti to someone and have it streightened out. Are you sure they don't work? They only come on when the engine is running and the vehcile is in gear. If you just start the truck up and look for the lights, they will not be on. It has to be in gear.
How do you turn off daytime running lights on a 2009 tacoma?
The only way to "turn them off" would be to modify the wiring system. Unless you are a professional and have the wiring diagrams for the truck, I would recommend leaving the system alone.
