You need an OBD II scanner.....about $40 - $150 depending on where and which features you want.
To disable the security system in a 1999 Chevy Silverado, insert the key into the ignition and turn it to the "On" position without starting the engine. Leave the key in this position for about 10 minutes until the security light turns off. Afterward, turn the key back to the "Off" position and then start the engine. If issues persist, you may need to consult the owner’s manual or a professional for further assistance.
All you need is a clip........Go to shhding.com
Do it yourself engine transmission flush and filter change on 2005 Chevy silverado 5.3?"
You must have an engine scanner to do that.
YES, They sure are and will interchange with NO problems. Direct bolt in.
Yes.
The gross weight of a 1988 Chevy Silverado K2500 with a 5.01 engine is about 2.5 tons. This is equal to about 5,000 pounds.
battery dicunnect for 3 min. or take to auto parts store and have cleared
That engine has 2 of them and believe it or NOT. they are UNDERNEATH the intake manifold. You will have to remove the intake to even SEE them are to service them.
The vacuum lines on a 2000 Chevy Silverado run between the intake manifold and multiple valves across the top of the engine. The vacuum pressure is generated by the engine's compression.
push your parking brake one click and it will turn them out
On my 03 Chevy Silverado I just added brake fluid and the message turned off.