Do it yourself engine transmission flush and filter change on 2005 Chevy silverado 5.3?"
It is between the transmission and the engine, You must either remove the engine are the transmission to get to it.
That would be a 4L60E transmission.
There is 2 of them in the back of the engine. You will have to pull the engine are remove the transmission and fly-wheel to get to them. It is what ever is the easiest for you.
Should be the 700R4
no
the transmission is located on the driver's side of the engine and yes the engine has to be removed to change the transmission
Mitchell labor estimating guide for a 99-2000 silverado 4wd 4.9 hrs and with skid plate add .2 engine and trans combos would make a little dif
Every sensor on the engine and transmission can cause the light to come on.
Nope.
If the 99 had a 350 vorteck in it, then it will not fit. In late 1999 GM stoped making the 350 engine and redesigned the engine block and Transmission.
looking for diagram of 5.3 liter v8 engine Chevy silverado truck transmission and torque converter?
Type your answer here... NO. The 95 MUST have the 4L60E transmission put BACK in it if it is a 1/2 ton. If it is a 3/4 ton then it MUST have the 4L80E trans. put in it. If you put the 91 transmission in it then the engine will not run right and the transmission won't shift.