if it is the factory alarm the module is behind the glove box, it is grey and has one wire terminal. i unplugged mine today and the alarm became disabled, one catch, your remote locking and entry will be disabled as well. if you are having alarm troubles try replacing the module and reprogramming the remote instead of disabling the alarm. the module is the same as a Bonneville module and can be purchased for peanuts at a wrecking yard. another problem is the mall module , its next to the alarm module and has two terminals, Buick has a recall on this module. good luck!
To disable the alarm system on a 1992 Buick Park Avenue, insert the key into the driver's side door lock and turn it to unlock the door. This should deactivate the alarm if it was triggered. If the alarm persists, you can also try disconnecting the battery for a few minutes to reset the system. Always consult the owner's manual for specific instructions related to your vehicle.
To disable the factory alarm system on a 1988 Buick Reatta, you can try using the key to lock and unlock the driver's door, as this often resets the alarm. If that doesn’t work, locate the alarm fuse in the fuse box and remove it to disable the system temporarily. Additionally, you may need to consult the owner's manual for specific instructions or check the wiring for any manual disable options.
Check the fuse box. There is an "Alarm" fuse.
gfhjjtfnmghnmgmbgm,bhjkkkkkkkkkkmhghmghmhnfhnfgnfgn.
You must fasten your seatbelt
The easiest way to disable your 1993 Buick factory alarm is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
i was wonderin the same thing....can you let me know??
Pull the fuse or fuel pump relay.
To disable the security system on a 1995 Buick Park Avenue, you typically need to insert the key into the ignition and turn it to the "On" position without starting the engine. If the security light remains on, you may need to leave the key in the "On" position for about 10 minutes until the light turns off, which should reset the system. If the issue persists, consult the vehicle’s manual for specific instructions or consider contacting a professional for assistance.
This can only be done at a dealership.
if you have that manual go to the fuse box section, see what fuse it is and pull it out.
how to disable pass lock fuel system cutoff on 1996 buick skylark so it still starts