0
What else can I help you with?
1988 bronco brake light switch adjustment?
The 1988 Ford brake light switch does not adjust, replace it with a new one.
How do you reset the computer in a 1988 Ford Bronco?
try to disconnect battery for 30 seconds
Why will 1988 RX7 auto convertible top clode but not open?
The emergency brake must be on for the top to open. If the brake light on the dash does not come on with the emergency brake on then you will need to replace the switch on the emergency brake.
Why will 1988 RX7 auto convertible top close but not open?
The emergency brake must be on for the top to open. If the brake light on the dash does not come on with the emergency brake on then you will need to replace the switch on the emergency brake.
Are the brake pads supposed to be touching the rotor on your 1988 bronco when the brakes are released?
Yes, they will be very slightly touching.
Why does the 1988 supra emergency brake light goes on and off when the emergency brake is down.?
SOUNDS LIKE A WARNING LIGHT TO ALERT YOU THAT YOUR EMERGENCY BRAKE IS STILL ON PERHAPS YOU NEED THECABLE ADJUSTED Check the brake light bulbs to see if any are burned out. On the 1983 it is linked to the brake fluid level.
How do you fix 1988 S10 emergency brake cable?
Really ain't no fixing a brake cable. Replace it with a new cable.
Why would your fuses blow after releasing the emergency brake on your 1988 mustang?
because there is a short somewhere
What is the button next to the emergency brake in a 1988 Honda Accord do?
Possibly power mirror switch.
How do you release the parking brake if the release cord is broken on a 1988 Oldsmobile Cutlass?
If you can't access the release lever on the brake pedal (where cable connects to emergency brake mechanism), you may have to go under vehicle and access the adjusting nut (where main cable from interior of vehicle connects to the individual wheel cables) and disconnect the main from wheel cables.
1988 ford bronco steering column 1993 bronco?
NO
How do you remove the ignition switch on 1988 ford bronco?
To remove the ignition switch on a 1988 Ford Bronco, first disconnect the battery to prevent any electrical shorts. Next, remove the steering column covers by unscrewing the screws holding them in place. Then, locate the ignition switch, disconnect its wiring harness, and remove the mounting screws that secure it to the column. Finally, carefully pull the ignition switch out of the column.
