I need to disconnect horn on 1198 Plymouth voyager. My wife to car to shop because would not stop they sain they dissonected horn but when she got home went on and off till she turn off car TY
On the -87 Voyager the fuse for the lighter that (as stated below) also covers the horn is fuse #7 that is thesecond one from the top in the second row from the left. (In Sweden the Voyager is a Chrysler.) blixten_200.AnswerWe have a 92 Plymouth grand voyager and the cigar lighter does not work and the horn also does not work.
HI WERE IS THE HORN RELAY GO
the horn is located on the driver side of car under the fender whel in front of the driver side tire
check if there is a fuse box under your hood. That's where mine is but it is a 97.
sohunds like you have a short on the horn botton, you only have a hot wire, so when you push the horn botton it make a gorund to make the horn sound
To disconnect the horn on a 1996 Plymouth Voyager, first, ensure the vehicle is turned off and the key is removed from the ignition. Locate the horn relay in the fuse box or the horn itself, which is typically found near the front of the vehicle. You can disconnect the horn by unplugging the electrical connector attached to it or removing the fuse associated with the horn in the fuse box. Always consult the owner's manual for specific instructions and safety precautions.
fuse is located in fuse panel at lower left of steering wheel
It is important to know what is causing problems in a car. When the horn relay clicks, but the horn does not sound, it is not a fuse but more likely to be the cars clock spring.
There must be a short in the system somewhere that causes the fuse to blow.
Answering your question concerning the horn relay . I have a voyager 98 ,my horn and cruise control was not working so the problem was from a piece name clock spring located under the horn and cruise switches in the (direction) . So when i changed this clock spring both problems where solved . The clock spring is under warranty from Chrysler/Dodge due to a factory recall. Check with your local dealer to see if your model/year is covered.
The clockspring is the electrical connection under the steering wheel. If it is broken the horn and cruise switches are no longer part of the circuit.
To disconnect the horn on a 1998 Plymouth Breeze, first, disconnect the negative battery cable to ensure safety. Next, locate the horn, which is typically mounted in the front of the vehicle, and remove the wiring harness connected to it. You may need to use a socket or wrench to remove the horn if it's bolted in place. Once the connector is removed, the horn will be disconnected.