To replace the ball joints on an '85 Jeep CJ7, first safely lift and support the vehicle, then remove the front wheels. Next, detach the brake calipers and rotors, and remove the axle shafts if necessary. Use a ball joint press or a hammer to remove the old ball joints from the knuckles, then install the new ball joints, ensuring they are properly seated. Reassemble the components, torque everything to specifications, and check for proper alignment before driving.
Yes it will fit with just adding door strikers and housings from the 85 body or you can get them on ebay.
Lower ball joints call for 1.7 hrs per side for labor, app. $50 per hour = app. $85 per side for labor.
The 1985 Jeep CJ7 typically uses doors from 1981 to 1986 models. These doors are compatible due to similar body styles and mounting points. However, it's important to verify the specific features, such as window and door hardware, as there may be slight variations within those years.
yes, as log as they have the single post striker.
I had an 85 cj-7 doing the same thing. i changed the catalytic converter and problem solved. You may want to try it. The catalytic converter can become plugged or restricted.
To change the ignition key switch on a 1985 Jeep CJ7, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws, then locate the ignition switch attached to the column. Disconnect the wiring harness from the switch, unscrew it, and replace it with the new switch. Reassemble the column cover, reconnect the battery, and test the new ignition switch to ensure it functions correctly.
yes
NoNo
No. The bolt patterns are different.
The power of the engine and the maximum speed of the 1976 Jeep CJ5 are 150 hp and 85 mph respectively.
about 85 miles per hour
The power of the engine of the 1975 Jeep Cherokee automatic is 85 mph. The power of the engine is 110 hp.