You don't fix it, you replace it.
buy new lug nuts
A 1997 Dodge Ram doesn't have a EGR valve.
It is located on the valve cover. It is usually white, or used to be white, and it has vaccum hoses connected to it. It pulls right out of the valve cover. Easiest fix on the truck.
look along the valve covers on the heads, there should be a small pipe that when pulled seems to go no where, that should be the PVC, it is a simple fix
To fix a leaky PVC joint, you can try tightening the joint, applying PVC primer and cement, or using a repair coupling.
To fix a leaking PVC joint on a seal, you can try tightening the joint, applying PVC primer and cement, or using a repair coupling.
You can fix a leaking PVC joint without cutting it by using a PVC repair coupling or a PVC repair epoxy. These products can help seal the leak without the need to cut the joint.
Replace the valve cover gasket.
To fix a leaking PVC pipe joint, you can try tightening the joint with a wrench, applying PVC primer and cement to reseal the joint, or replacing the joint if it is damaged beyond repair.
take it to a transmission shop. The problem is in the tcc valve body.
drivers's side valve cover.midway back from front of truck...this fix is easy...pull it out from the valve cover ...attached to small diameter hose...and shake it to see if it rattles...they are cheap so replace it...and if it rattles....U know its the right part B.C.
To fix a leaking PVC joint, you can try tightening the joint, applying PVC primer and cement, or using a repair coupling. If these methods don't work, you may need to replace the joint altogether.