I had to take mine to a garage - the clips that the window sits on are brittle plastic, and they snap - you can get a replacement kit for around
Remove the inside door panel. The entire power window mechanism will be visible. Put the window back onto the window track.
Take door panel off. and put window back on track.
Car windows go up and down on a track. It has fallen off of the track.
To fix a window that has fallen off track in a Honda Element, first remove the door panel by unscrewing any visible screws and carefully prying it off. Once the panel is off, inspect the window’s track and ensure the window regulator is functioning properly. Realign the window by sliding it back into the track and securing it, then reassemble the door panel. Test the window to ensure it moves smoothly up and down before finishing.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
It probably hasn't fallen off the track. The part of the window regulator that attaches to the window is probably broken. Mine did the same thing. I took the window and regulator out of the car and epoxied the part back together and then reinstalled it. Been over a year now and still working fine.
If your window is like my grand am the glue that holds the track and window together is not holding properly, so window keeps coming off track. I have not found a glue that holds yet.
I have the same problem on my 1998 Ford Expedition XLT. I have put it back on track about 5 times and keeps coming off again and again. I'm going to use the same glue the windshield installers used. I'm going to buy a tube of the glue from them, this will resolve the window from coming off track.
You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.
Either the power window motor is bad or the window is binding in the track mechanism.
most likely the gears are jammed at the crank and unable to turn. the window may have fallen off the track as well. If you have power windows then the regulators give a good deal of problems.
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.