open trunk...reach inside by the light assembly...loosen the wing nut type bolts....then loosen the 2 nuts by where the trunk meets the body on the trunk side...pull the entire assembly out....replace bulb.
how to remove rear struts on 2005 chevy cobalt
Sylvania 3357 or 3157
You can't there stuck in there forever
how to change rear hub on 2006 chevy cobalt 2.2l
Start with checking the left rear brake light bulb.
To change the rear turn signal on a 2007 Chevy Cobalt, first, open the trunk and locate the tail light assembly. Remove the screws or plastic clips holding the assembly in place, then carefully pull it out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble the tail light by reversing the steps. Ensure everything is securely fastened and test the signal to confirm it works.
Open trunk... access from behind panels. Wes
Replacing a turn signal bulb on a 2005 Chevy Cavalier can take less than a few minutes requiring no tools and just the bulb itself. First locate the housing the turn signal located in the trunk, then remove the plastic cover. Pull out the old bulb and install the new unit.
Replace the rear bulb and be sure the contacts are clean.
In the back seat behind the rear headrest under the platform between the 2 rear winshield speakers.
rear 6"X9" and the front is 6.5"
2005 Chevy Malibu, shocks in rear, Struts in front.