To fix a tangled cable on a 2000 Buick LeSabre driver's side window regulator, first, remove the door panel to access the regulator. Carefully unwind the tangled cable, ensuring not to damage it, and realign it in the guide tracks. If the cable is frayed or damaged, consider replacing the entire window regulator assembly. Reassemble the door panel and test the window operation before finalizing the repair.
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.
Replace the window regulator, it may come with the motor.
Begin by removing the inside door panel. Remove the wiring harness from the electric window regulator. Remove the window regulator retaining screws.
The window is not off track. The window regulator is broken. In most cases you will have to replace the window motor and regulator as an assembly.
replace window regulator
Bad regulator maybe?
replace window regulator assembly.
Replace the window regulator.
To install a new window regulator on a MGRZ driver's door, remove the door panel and the wiring attached to the power window mechanism. Remove stereo speaker from the inside door and the window glass. Remove the old window regulator and replace with new.
Apparently after 36 years the window regulator needs some lubrication ! I removed the window and then the regulator and then lubed the whole of the regulator using a silicone spray. Fixed ! Getting the regulator and window back in the door was a whole other story.
turn bolts to the left, install regulator, turn bolts to the right
souds like the window came of the regulator mount oryou have a bad reg or motor