Code P0733 indicates an issue with the transmission, specifically that the transmission is not shifting into third gear. To fix this, start by checking the Transmission Fluid level and condition, as low or dirty fluid can cause shifting problems. Next, inspect the transmission control module and wiring for any faults, and consider checking the solenoids and shift linkage for proper operation. If these steps do not resolve the issue, a professional diagnostic may be necessary to identify deeper mechanical problems.
Trouble code P0572 means: Brake Switch A Circuit Low
went to emission and fail.The codes gave was p0732 and p0733 ratios. she said turn on the car engine light don't on gages.
Replace the catalytic converter.Replace the catalytic converter.
Trouble code P1193 means:Inlet air temp sensor voltage high Try replacing the sensor to fix error
The code P1193 on a Dodge Neon indicates an issue with the intake air temperature (IAT) sensor circuit. To fix it, first check the IAT sensor and its wiring for damage or corrosion. If the sensor appears faulty, replace it. Additionally, inspect the connector and wiring harness for any breaks or shorts, and clear the code from the vehicle's computer after making repairs.
No, do you?
Code P0117 indicates a problem with the engine coolant temperature (ECT) sensor circuit, typically due to a low voltage reading. To fix this issue on a Dodge Neon, first, check the ECT sensor and its wiring for any damage or corrosion. If the connections are secure and the wiring is intact, replace the ECT sensor. Finally, clear the code and test drive the vehicle to ensure the issue is resolved.
If loose they will need replaced.
about $1400, it sucks
The computer needs replaced.
The P1899 code on a 2000 Dodge Neon typically indicates a problem with the transmission control module (TCM) or its communication with the engine control module (ECM). To fix this code, start by checking for any loose or damaged wiring and connectors related to the TCM. If the connections are secure, consider resetting the code and performing a thorough diagnostic to check for other related codes or issues. If the problem persists, the TCM may need to be replaced or reprogrammed.
P0700 just reads as code present in the transmission computer. You need to have the transmission computer checked for codes to know possible causes.