P1492 Battery Temperature Sensor Voltage Too High
Test and/or replace the battery temp sensor. It is usually located under or near the battery.
You first need to have it checked for codes, you then fix the cause of the code, you can then clear the code with a scan tool.
The first step is having the computer checked for codes. When you know the failure code you can diagnose for possible causes.
It usually means the map sensor has failed.
A 2007 Chrysler Sebring that will not shift out of Park will probably need a shift solenoid replaced. This is inside the transmission and the transmission might have to be taken out of the vehicle to be fixed.
crankshaft posistion sensor
try getting a new crank
Make sure the plugs under the seat are connected. The seat belt stays locked if they are not
yes it is worth it it can cost hundreds if dollars to fix if you **** it up :---}
The first two steps are to check the fluid and check the computer for trouble codes.
Take it to a service shop and have the trans checked for codes.
The most common window problems in a 2007 Sebring are the fuse, the relay, the switch, and the motor. Check the fuse and the relay. If they are ok then the door will have to have the panel removed to reach the switch and motor.
Buy a new gas cap that will fix it