A vacuum line is broken.
Often the small vacum line that goes from the top L/H side over to the R/h fender and attaches to rear heater selnoid will melt as it passes over the intake manifold. It get hot and brittle and eventually breaks.
The firewall is the piece of metal below the windshield that separates the engine compartment from the interior of the vehicle.The firewall is the piece of metal below the windshield that separates the engine compartment from the interior of the vehicle.
The interior light on an 87 cabriolet is located above the mirror just above the windshield.
Interior filter is located in the cowl area (Black plastic at the base of the windshield). Open the hood, it should be just left of the passenger side windshield wiper an oblong lift out panel in the cowl.
On mine it is Fuse # 26, on the interior (underdash) fuse panel.
Larry EchoHawk is the Assitant Secretary of the Interior for Indian Affairs.
From the plastic interior of the car. Fumes from the plastic get on the windshield. The other cause is smoking too much potin the car. A friend of mine actually took a razor blade and scraped the windshield to get enough for a rolling paper and smoked it. Got higher than a kite doing that!
To replace the windshield on a Ford Mondeo, first, remove the interior trim and any necessary exterior moldings around the windshield. Next, carefully cut away the old windshield using a windshield removal tool, ensuring not to damage the frame. Clean the bonding surface thoroughly, apply a suitable adhesive, and position the new windshield carefully. Finally, secure it in place and allow the adhesive to cure as per the manufacturer's instructions before reinstalling the trim.
To replace the windshield on a 1989 Dodge Spirit, start by removing the interior trim and any molding around the windshield. Carefully cut the adhesive seal using a specialized windshield removal tool or a utility knife. Once the old windshield is removed, clean the frame thoroughly, apply new adhesive, and position the new windshield in place, ensuring proper alignment. Finally, reattach the trim and allow the adhesive to cure as per the manufacturer's instructions.
The interior rear view mirror on a Volvo can be replaced by using the mounting kit that comes with a new mirror. The Volvo uses a very strong adhesive pad to connect the rear view mirror to the windshield.
All state laws require vehicles to have rear view mirrors (the ones that mount to the interior windshield).
Floor at passenger side? Could be heater core needs replacing Other possibilities: door seal windshield seal
"Based on reviews, windshield covers are quite effective at keeping the interior of a car cooler than a car without a windshield cover. It seems that the lighter colored or reflective covers work better than dark colored covers."