start with the serpentine belt still on to hold the pulley while you loosen the four small bolts on the front. If it still turns, wedge a flat bar or wrench handle across two bolt heads to hold it still.
Yes, all cars do. It is the crankshaft pulley assembly...the biggest pulley, typically, at the very bottom of the engine.
another 1992 buick century radiator
To remove the AC compressor pulley on a 1992 Buick Century, first, disconnect the battery and relieve the AC system pressure. Next, remove the serpentine belt and any other components obstructing access to the pulley. Use a pulley puller tool to carefully extract the pulley from the compressor shaft. Finally, ensure all components are reassembled correctly and check for any issues before operating the vehicle.
replace heater core on 92 buick century
P185x75x14
On a 1992 Buick Century, the oil filter is located between the radiator and the lower front of the engine. The radiator is situated in slightly in front of the filter.
how to replace spark plugs wires 1992 buick century v 6 3300 stationwagon
Under the glove compartment.
In the glove box.
It depends on where you are
Anywhere from 2900lbs to 3100lbs
In the dash, behind the glovebox..